Archives of the TeradataForum

Message Posted: Mon, 11 Feb 2002 @ 17:35:47 GMT

	<Prev	Next>		<<First	<Prev	Next>	Last>>

I am attempting to use the NOTIFY EXIT function for Fastexport. There is virtually no documentation available. According to NCR documentation the NOTIFY EVENT ranges from 0 to n. I have found that the EVENT is sequenced between 0 and 40. Since the EVENT number is undocumented I cannot identify what is in P->Event as shown in the log below. Can anybody can provide some information on the NOTIFY EXIT events?

P->Event was 0.
P->Vals.ReqBegin.Request was
P->Vals.Exit.ReturnCode was 23.
P->Vals.FetBegin.StatementNo was 23
P->Vals.FetBegin.BlockCnt was 1769238350
P->Vals.Complete.dummy was 23
P->Vals.ReqDone.StatementCnt was 23
P->Vals.Init.dummy was 23
P->Event was 31.
P->Vals.ReqBegin.Request was
P->Vals.Exit.ReturnCode was 0.
P->Vals.FetBegin.StatementNo was 0
P->Vals.FetBegin.BlockCnt was 0
P->Vals.Complete.dummy was 0
P->Vals.ReqDone.StatementCnt was 0
P->Vals.Init.dummy was 0
P->Event was 35.
P->Vals.ReqBegin.Request was
P->Vals.Exit.ReturnCode was 8.
P->Vals.FetBegin.StatementNo was 8
P->Vals.FetBegin.BlockCnt was 1953719668
P->Vals.Complete.dummy was 8
P->Vals.ReqDone.StatementCnt was 8
P->Vals.Init.dummy was 8
P->Event was 32.
P->Vals.ReqBegin.Request was
P->Vals.Exit.ReturnCode was 70.
P->Vals.FetBegin.StatementNo was 70
P->Vals.FetBegin.BlockCnt was 1701602675
P->Vals.Complete.dummy was 70
P->Vals.ReqDone.StatementCnt was 70
P->Vals.Init.dummy was 70
P->Event was 11.
P->Vals.ReqBegin.Request was
P->Vals.Exit.ReturnCode was 3807.
P->Vals.FetBegin.StatementNo was 3807
P->Vals.FetBegin.BlockCnt was 1013178791
P->Vals.Complete.dummy was 3807
P->Vals.ReqDone.StatementCnt was 3807
P->Vals.Init.dummy was 3807
P->Event was 12.
P->Vals.ReqBegin.Request was
P->Vals.Exit.ReturnCode was 12.
P->Vals.FetBegin.StatementNo was 12
P->Vals.FetBegin.BlockCnt was 0
P->Vals.Complete.dummy was 12
P->Vals.ReqDone.StatementCnt was 12
P->Vals.Init.dummy was 12

	<Prev	Next>		<<First	<Prev	Next>	Last>>