Home Page for the TeradataForum

Archives of the TeradataForum

Message Posted: Mon, 28 Aug 2001 @ 01:17:39 GMT

  <Prev Next>   <<First <Prev Next> Last>>  

Subj:   Re: Unix FastExport problem: UTY4014 Access module error '34'
From:   Sam Mosley

There is a tool owned by EMC, and which is not actively being sold, but may be available if you press, called Terafile, which allows larger than 2 gig. files in NCR MPP-RAS. However, I believe that FastExport and BTEQ recognize the 2 gig. limit, even if you have the ability to support larger files in the NCR unix environment. Kinda kills the objective of exceeding 2 gig. if you still can't do what you need to do. You can, however, create load files larger than 2 gig. and the load utilities will operate on these files. Of course, every silver lined cloud has a dark side.

Good luck, and maybe the mainframe isn't so dead after all!

Sam Mosley

  <Prev Next>   <<First <Prev Next> Last>>  
  Top Home Privacy Feedback  
Copyright for the TeradataForum (TDATA-L), Manta BlueSky    
Copyright 2016 - All Rights Reserved    
Last Modified: 28 Jun 2020